[Previous Page] [Next Page] [Up] [Home Page]


Electronic Testing Services
Also see:
Testing and Measurement
Electronic Test & Measurement Equipment


Electronic Test Center, Inc.
CONTACT: Jeff Karnes or Patrick McGinn
PHONE: 630-628-6646
FAX: 630-628-6670
MODEM: 630-629-3118
E-MAIL: fixtures@etctest.com
www.etctest.com
ADDRESS: 1460 Bernard Drive,
Addison, Illinois
CATEGORIES: Electrical Test Services, Testing & Measurement, Electronic Test & Measurement Equipment
At ELECTRONIC TEST CENTER, we understand the importance of accurate, dependable testing. That’s why we provide board test results that you can count on!
Our test procedures and equipment are state of the art, and include two Everett Charles Technologies bare board test systems and Moving Probe capabilities for uncompromising accuracy.
More than forty years of combined industry know-how enables our service technicians to meet even the most demanding customer needs with unequalled accuracy, innovation and flexibility.
Timely response, pride in workmanship and meticulous attention to detail are just a part of our commitment to becoming a “production partner” for your current and future PC board testing requirements.


eTesters
PHONE: 540.885.8730
Fax: 540.885.8740
info@etesters.com
www.etesters.com
ADDRESS: 219 W. Beverly Street, Suite 207
Staunton, Virginia 24401
CATEGORIES: Testing & Measurement - Electronic Testing Services
eTesters represents the interests of the Test & Measurement community by applying its core competencies in search engine technology and standards development for the benefit of all. We serve the community by being an Open Information exchange that is fast, intuitive, T&M comprehensive and built on standards. Our efforts benefit the community by increasing information quality, decreasing its cost and speeding its delivery. Automating information exchange between testers, both man and machine, is eTesters mission.


Factory Test Programming
CONTACT: Gary Krig
PHONE: 310.539.3600
E-MAIL: Gary@factorytest.net
factorytest.net
ADDRESS: 3635 Newton St. ste C.,
Torrance, California 90505
CATEGORIES: Electronic Testing Services
In-Circuit Test Services for Circuit Boards. ICT for Teradyne or Agilent Testers.
Functional Test Development with PXI National Instruments. Labview Programming.
Fixture design service. PCB Layout for Fixture Electronics. Test Program Development.
Test, Tag, and Fault Diagnosis.

Fixtures are purchased and inspected to your Statement of Work.
Typical features are: ESD Coating, Iso-vac, Shorting Plate.
Programming begins with CAD file processing to fixture wirelist and Tester input files. Test Service is done in our Air Conditioned Workshop.

Eliminate DOA products by including ICT
ICT Testing will reduce the Dead On Arrival product count by catching manufacturing defects before they cause your product to fail prematurely.
The latest trend to eliminate ICT has caused a rise in the number of undetected defects.


Foundation Technology
CONTACT: Simon Gowler
PHONE: +44 (0) 1908 269120
FAX: +44 (0) 1908 269121
E-MAIL: info@foundation.co.uk
www.foundation.co.uk
ADDRESS: Foundation Technology Limited
Global House
Vincent Avenue
Crownhill
Milton Keynes
MK8 0AB
England
CATEGORIES: Assembly Services / Contract Manufacturing / Project Management & Turnkey Services * Electronic Testing Services * Printed Circuit Board Manufacturers
Foundation Technology provides products into high reliability and high quality applications worldwide including markets such as, communications, military, aerospace, IT, industrial and automotive.
Whether you need a strategic partner for the total outsource of manufacturing, or simply an overflow facility for your current in-house manufacturing, Foundation Technology can provide the capacity and services to meet your needs.
Foundation Technology can offer:
• Fast Turnaround Prototyping
• Design for Manufacture and Test
• Batch Build Manufacturing
• Materials Procurement and Management
• Test and Test Strategy Development
• General Assembly and Box Build
• Repair and Re-work


Kingfield Electronics
CONTACT: Sales
PHONE: +44 (0) 1246 451701
FAX: +44 (0) 1246 572390
E-MAIL: sales@kingfield-electronics.co.uk
www.kingfield-electronics.co.uk
ADDRESS: Kingfield Electronics Limited
Carrwood House, Carrwood Road, Chesterfield Trading Estate,
Chesterfield, Derbyshire, United Kingdom S41 9QB
CATEGORIES: Assembly Services / Contract Manufacturing / Project Management & Turnkey Services * Electronic Testing Services * Printed Circuit Board Manufacturers
Our services include:
• Complete Product Design Solutions encompassing hardware, software, compliance, and product aesthetics.
• Global Material Sourcing capability allowing access to both UK and off-shore sourcing and manufacturing operations.
• Rapid Turnaround prototyping capability. From PCB assembly through to full box build.
• Low and Medium Volume PCB Assembly capability comprising Surface Mount, and Through-Hole PCB assembly, AOI and fixtureless flying probe test capability.
• Extensive Box-Build and System Integration capability with considerable expertise in low to medium volume, high mix environments.
• A quality system accredited to ISO 9001:2000 and utilising workmanship standards to IPC-A-610.


Mile High Test Services, Inc.
www.mhtest.com

Colorado office:
CONTACT: Steven Riedman
PHONE: 303.651.9757
FAX: 303.651.9758
E-MAIL: info@mhtest.com
624 South Sunset Street,
Longmont, Colorado 80501

Texas office:
CONTACT: Federico Valle
PHONE: (972) 243-1112
FAX: (972) 243-1117
E-MAIL: info@mhtest.com
12907 Valley Branch Lane,
Farmers Branch, Texas 75234

CATEGORIES: Artwork Scanning & Electronic Testing Services
Printed Circuit Board Testing and Repair Services, Scanning/Reverse Engineering services, ( artwork or raw board, including multilayer boards ), Data Conversion.
* 10 - 1000 Volt Testing
* 100 Megohm Isolation
* Net List Gerber Extraction
* Large Grid Dual Access Testing ( 19” X 25” )
* Flying Probe Testing
* Ceramic/Hybrid test capabilities
* Hipot test Capabilities
Give us a call or visit our web page for more information


Testnec Electronics
CONTACT NAME: Charles Barrington
PHONE NUMBER: 972.475.7172
FAX NUMBER: 972.475.0987
E-MAIL: testnec@aol.com
ADDRESS: 3206 Main Street Suite 109
Rowlett,Texas 75088
CATEGORIES: Electronic Testing Services
Testnec Electronics has been in business for 10 years we are a electronic testing lab,that specializes in high pitch surface mount devices and both high tech testing to low volume prototypes.
We also have a universal tester: mania grid size is 18x20.
We can also digitize from drill files for production, when customers dont have gerber, or CAD we can create a drill files for them.
We also specialize in supporting the industry with fast turn around at competitive prices.


Ultra CEMS
CONTACT: Sales
PHONE: 01305 784738
FAX: 01305 777904
E-MAIL: cems@ultra.co.uk
www.ultra-cems.com
ADDRESS: Ultra Electronics Manufacturing Services, Waverley House, Hampshire
Road, Granby Estate, Weymouth DT4 9XD UK
CATEGORIES: Assembly Services / Contract Manufacturing / Project Management & Turnkey Services * Electronic Testing Services * Printed Circuit Board Manufacturers
Part of the high technology Ultra Electronics Holdings Plc., Ultra CEMS has been providing full turnkey contract manufacturing services for over 40 years.
These include: -
• On site electronic design e.g. design and layout of complex PCBAs
• A global materials procurement capability complemented by strategic group deals
• Full material traceability and moisture sensitivity control
• 0201 to uBGA placement capability with on site AOI & X-ray systems
• Lead free PTH/SMT soldering capability
• Final product assembly (using Moulded Plastics, Cast/Machined Metal components)
• Specialist assembly processes including backplane, potting, encapsulation, cable assembly, wire wrapping and conformal coating
• A comprehensive suite of test resources including:- In-Circuit, ESS, Flying Probe, JTAG, Functional, Thermal Stress and Vibration Testing
• Distribution of finished product to end user if required
• Workmanship to IPC-610 - J STD Class 3 and MIL STD 2000
• List X facility status for defence OEMs


Viking Test Services
CONTACT: Jake Kelly
PHONE: +44.1730.261912
FAX: +44.1730.265652
MODEM: +44.1730.260562
E-MAIL: sales@vikingtest.com
www.vikingtest.com
ADDRESS: The Avenue, Petersfield
Hants GU31 4JQ UK
CATEGORIES: Electronic testing services, Testing & measurement, Equipment manufacturers, distributors, fabrication equipment, CAD/CAM software
Viking Test Services are proud to be the European representatives for the world leading series of MicroCraft flying probe test machines.
Viking Test Services is the leading independent UK bare board test service.
We were established over 15 years ago and have many years experience in electrical test.
Viking Test Services uses the best equipment and software available to ensure the best results for our customers. With new improved capacity and staff levels we can now even better this service.

Google
 
Web www.everythingpcb.com



[Previous]  [Next]  [Up]  [Home]