[Previous Page] [Next Page] [Up] [Home Page]

[Home Page]

Drilling, Milling & Routing Software

Also see:
Drill, Routing & Scoring Bit - Suppliers
Drilling, Routing & Scoring - Services

California Software Systems
PHONE: 831.623.1707
FAX: 831.623.1553
E-MAIL: sales@californiasoftwaresystems.com
ADDRESS: 1791 San Juan Canyon Road
San Juan Bautista, California 95045 USA
CATEGORIES: Drilling, Milling & Routing Software
California Software Systems can probably do more to improve productivity and quality in Drilling and Fabrication than any other single investment you can make.
Fundamentally we connect computers to your drills and routers and then network the computers to your CAM department. We work with all types of machines, new and old, including Excellon, Hitachi, Mania, TruDrill, PDA, Dynamotion, ATI, Wessel, Posalux, Pluritec, and others.
Our standard products include:
* Graphical Drill/Route System
* Drill Room File Server System
* DNC File Server System

Carbide 3D LLC
CONTACT: Support
PHONE: 310.504.3637
E-MAIL: support@carbide3d.com
ADDRESS: 3630 Skypark Dr.
Torrance, California 90505 USA
* 2D CAD / CAM Software
* Drilling, Milling & Routing Software
Carbide Copper PCB Software:
"Make PCB's on Your Desktop with no Chemicals or Mess"
Carbide Copper is free CAM software to let you mill PCBs with your CNC machine.
Carbide Create:
Carbide Create is a free Full-Featured 2D Design Program.
You can load SVG and DXF files directly into Carbide Create.

CONTACT: Juan Pablo Caram, PhD
* Drilling, Milling & Routing Software
* Demo, Shareware, Freeware, Open Source & Trial Software
FlatCAM lets you take your designs to a CNC router. You can open Gerber, Excellon or G-code, edit it or create from scatch, and output G-Code. Isolation routing is one of many tasks that FlatCAM is perfect for. It's is open source, written in Python and runs smoothly on most platforms.

* Drilling, Milling & Routing Software
* Demo, Shareware, Freeware & Trial Offer Software
PCB-GCode is a Freeware milling machine, router, engraver software package for Eagle.
Pcb-gcode lets you use your milling machine, router, engraver, etc. to make printed circuit boards without using toxic chemicals.
You create your design with Eagle, then use pcb-gcode to create g-code, which you run on your machine. Your machine cuts around the traces for the circuits. pcb-gcode also creates drill files to drill holes, mill files to cut the board out, or make cutouts in the board. You can also create files to engrave text on the boards, such as your copyright, component names, etc.

SheetCam / Stable Design
PHONE: +44(0)1237 471170
E-MAIL: sales@sheetcam.com
ADDRESS: Stable Design,
The Stables, 57 old Town,
Bideford, Devon, EX39 3BH UK
CATEGORIES: Drilling, Milling & Routing Software
SheetCam is a low cost but feature packed CAM package. SheetCam is suitable for milling, routing, plasma, waterjet, laser and oxy-fuel cutting.

Web www.everythingpcb.com

[Previous]  [Next]  [Up]  [Home]