Printed Circuit Design & Layout

4th Dimension PCB, Inc.
CONTACT: Mark Eckert
PHONE: 954.240.3600
E-MAIL: info@4thdpcb.com
www.4thdpcb.com
ADDRESS: 12311 NW 30th Street,
Sunrise, Florida 33323
CATEGORIES: Printed Circuit Design & Layout
4th Dimension PCB, Inc. provides circuit board design services to engineering companies that develop or manufacture electronic products for automotive, military, aerospace / avionics, telecommunications, computer hardware, consumer electronics, and medical device applications.

Actinic PCB Design
CONTACT: Gordon Stalker
PHONE: +44 (0)1273 705525
E-MAIL: gordonstalker2@hotmail.com
www.actinicpcb.com
ADDRESS: 67 Elm Grove, Brighton,
Sussex, BN2 3ET, UK
CATEGORIES: Printed Circuit Design & Layout
PCB designs can be created for all levels of sophistication. From single
layer through-hole, to multiple layer high-speed, high-density surface mount
designs.
Boards produced from your CAD files or hand drawn designs.
Schematic capture using industry standard software.
ATE data for test-points.
Manufacturing documents and drawings.
Prototype procurement.
Library parts generation.

A&D Designs
CONTACT: Roger Doucette
PHONE: 520.275.3487
E-MAIL: roger@addesignssite.com
www.addesignssite.com
ADDRESS: Tucson, Arizona
CATEGORIES: Printed Circuit Design & Layout
LET US GET YOU CONNECTED! With over 35 years experience Designing PCB's for both Commercial and Military applications. SCHEMATIC to finished PCB Design including FABRICATION, ASSEMBLY DRAWINGS and BILL OF MATERIAL, DESIGN to your specs.

Alterflex Corporation
CONTACT: Ken Wong
PHONE: 408.441.8688
FAX: 408.263.1145
E-MAIL: pcb@alterflex.com
www.alterflex.com
ADDRESS: 1717 Oakland Road
San Jose, California 95151
CATEGORIES: PCB Design

AmeriCAD PCB Design
CONTACT: Steve Garrett
PHONE: 858.395.4812
E-MAIL: sgarrett@americadpcb.com
www.americadpcb.com
ADDRESS: PO Box 99518,
San Diego, California 92169
CATEGORIES: Printed Circuit Design & Layout
At AmeriCAD PCB Design, we have years of experience designing a wide range of printed circuit boards from a simple 2 layer thru-hole to complex multi-layer, double sided surface mount PCB designs. Our main software is PADS Power PCB, but we also have a number of translators, so please ask about your needs. We have competitive rates and quick turn around that today's customer demands.

Binnington Development Corporation
CONTACT: Sales
PHONE: 604.984.8481
FAX: 604.984.8487
E-MAIL: info@binnington.com
www.binnington.com
ADDRESS: 104-980 1st Street West,
N. Vancouver, BC Canada V7P3N
CATEGORIES: Engineering Services, System Integrator, PCB Design, and Programming
Binnington Development Corporation is a progressive industrial automation design, development, and consulting firm. Our experience and expertise spans multiple industries and industrial control systems. Our solutions MAKE YOU MONEY by dramatically increasing productivity and decreasing expenditure. Contact us and we will send you the proof!

Cadagile
CONTACT: Jenny Li
PHONE: 514.803.6988
FAX: 508.664.6525
E-MAIL: jenny@cadagile.com
www.cadagile.com
ADDRESS: 475, 32nd Ave, Unit 107,
Montreal, Quebec, Canada H8T1Y2
CATEGORIES: Printed Circuit Design & Layout
CADAGILE offers PCB, FPGA (ASIC), LOGO, WEBSITE, MECHANICAL design services. It was founded with the theme to optimize the requirements for electrical, performance, manufacturability, testability, and EMI.
We see this as our mission.
Our diversified staff offers our clients in engineering, design and manufacturing experience; capabilities include the latest in technology equipment and design methodologies in accordance with industry standards. Our diversified business infrastructure offers CADAGILE customers this vast knowledge to meet your most challenging design needs in a cost effective manner.

CA Design
CONTACT: Bob Chandler
PHONE: 408.226.1329
CELL: 408.218.7998
E-MAIL: sales@cadesign.net
www.cadesign.net
ADDRESS 1: 244 Primrose Drive,
San Jose, California 95123
Address 2: 201 Harrison St # 611,
San Francisco, California 94105
CATEGORIES: Assembly Services / Contract Manufacturing / Project Management & Turnkey Services
CA Design works with a variety of Fabrication and Assembly houses to provide the customer with quality, schedule, and pricing for designs done at CA Design. While we don't fabricate or assemble boards ourselves, we do stand behind the work of the vendors we use.
Each of our vendors has gone through a rigorous selection process, and provides only the highest quality services. We work closely with the fabrication and assembly houses on every design we do.
This Design For Manufacture process works well to ensure that all designs leaving CA Design are easy to manufacture, and easy to assemble.

CAD Design Concepts
CONTACT: Mike McMillan
PHONE: 530.846.3812
FAX: 530.846.3095
E-MAIL: mikeatcdc@jps.net
ADDRESS: 777 Vermont St.,
Gridley, California 95948
CATEGORIES: PCB Design & Printed Circuit Consultants
CAD DESIGN CONCEPTS SPECIALIZING IN PRINTED CIRCUIT BOARD DESIGNS
Cad Design Concepts was started in 1977, (after being in the design business since 1963), and has been specializing in PCB Designs for a variety of companies world wide.

With my experience of more than 30 years as a consultant, and my abilities to work on projects from concept to finished product I feel I can bring to the table the background your looking for to do any tasks you and your company might have.

Cad Design Concepts can quote your design needs over the phone, or you can email your files over for review. I'm sure you will find the quality and on time delivery refreshing.

Please review the following page for samples and more information about CDC and then call me so we can talk about the possibilities of working on your project.

For more information about CDC click here

CADnCAM.com
CONTACT: Nitin Raulji
PHONE: +91.94276.02297
FAX: +91.265.3919608
E-MAIL: sales@CADnCAM.com
www.CADnCAM.com
ADDRESS: J12, Natasha Park #1, New Chhani Road,
Vadodara 390002 India
CATEGORIES: Printed Circuit Design & Layout
CADnCAM.com is an India based Electronics Design and consulting company specializing in offering Turn-key solutions for Electronics Product Development and Manufacturing. We provide services like Electronics Product Engineering, Application Development, PCB Designing, Proto PCBs, Component Sourcing and Assembly, assuming complete responsibility to make your product to succeed.
CADnCAM offers Quality services at most competitive prices. We employ qualified and experienced professionals and use the most advanced tools.
With years of experience, we understand the importance of quality of service and security of your IP and offer a unique & full-proof system to protect your interests.
We offer: 100% Money Back Guarantee, Payment accepted thru Credit Card & Bank, Fast Delivery, 24x7 Services, Expertise on wide range of tools, Qualified & Experienced Team

CADParts and Consulting LLC
CONTACT: Don Beane
PHONE: 732.972.0247
FAX: 732.972.4455
E-MAIL: don@cadpartsusa.com
www.cadpartsusa.com
New Jersey Office: 500 Campus Drive Suite 101,
Morganville, New Jersey 07751
Tennessee Office: 623 Aqum Circle,
Crossville, Tennessee 38572
PHONE: 931.788.6312
FAX: 931.788.6452
CATEGORIES: Printed Circuit Design & Layout, CAD Library Parts
CADParts & Consulting LLC is a leader in electronic and product design services. Specializing in fast prototype development, we have a proven track record for turning concepts into products quickly and accurately.
Our team of engineers and designers has the expertise to help you through circuit changes or complex designs.
Put our services to work for you. Let us show you how outsourcing has worked for our customers. Visit our web site to find out more.

CADWARE s.r.o.
CONTACT: Milan Klauz
PHONE: +420.48.5106131
FAX: +420.48.510 7114
E-MAIL: cadware@pvtnet.cz
www.cadware.cz
ADDRESS: Heydukova 1181/2, 460 01 Liberec,
Czech Republic
CATEGORIES: Printed Circuit Design & Layout, Equipment Manufacturer (Photoplotter)
CADware s.r.o. is PCB Design Service Bureau offering fast, professional layout in PADS PowerPCB / Specctra for a low, local price. We also the manufacturer of a small, low cost raster photoplotter! Please visit our web site for more information on all our products and services.

Cadwerx
CONTACT: Philip Vela
PHONE: 209.832.3779
FAX: 209-832-5424
E-MAIL: info@cadwerx.com
www.cadwerx.com
ADDRESS: P.O. Box 214
Tracy, California 95378
CATEGORIES: PCB Design & Layout
Cadwerx offers experienced schematic capture and quick-turn printed circuit designs to your specifications.
Serving the electronics industry since 1987, we deliver unmatched quality at highly affordable prices.

For more information, please visit our website.

CEDA PCB Design
CONTACT: Probir Debnath
PHONE: 9111 22780394 /(M) 0091 9810338939
FAX: 9111 22780394
E-MAIL: ceda@vsnl.com
www.ceda.in
ADDRESS: 5G - Deepa Plot #10, IP. EXT. Patparganj,
Delhi 110092 INDIA
CATEGORIES: Printed Circuit Design & Layout
Serving the electronics industry since 1994, CEDA has offered quick turnaround service for printed circuit designs, schematic capture and reverse engineering of bare / component-mounted pcbs with an emphasis on “First Time Right Design.” We specialize in high-speed PCB layout, signal integrity analysis and PCB-REVERSE engineering services. All of our engineers have minimum of 4 to 5 years experience in high speed PCB design. All of our services offer high quality and short delivery times and are cost-effective.
We also have 25 + PCB Design engineers available for temporary contracting jobs for a minimum period of 3 to 6 months at a very low cost. You’ll get a full time Virtual PCB designer who will be responsible for all types of PCB and other possible jobs.
For more details please give us a call or visit our site at www.ceda.in

Custom Tooling & Test Fixture
CONTACT NAME: Lee Zuhars
PHONE NUMBER: 206.632.0332
FAX NUMBER: 206.632.0332
E-MAIL ADDRESS: velopsych1@seanet.com
www.seanet.com/~velopsych1
STREET ADDRESS:
 P.O.B. 21913
Seattle, Washington 98111
CATEGORIES: Engineering Services, PCB Test Fixtures, Printed Circuit Design & Layout & Contract Manufacturing
· ATE, ICT, semiautomatic & manual electronic test fixtures, PCB test fixtures, cable test fixture, wiring harness test fixtures, dedicated test fixtures, functional test fixtures, electronic test fixture programming.
· PADS Schematic capture, circuit board layout, PCB design prototype, solder paste stencils, X-Y coordinate data, B.O.M. maintenance, and manufacturing documentation, Gerber data. Manufacture engineering. Production improvement consultation. DFM, Design for manufacture. DFT, Design for test.
· AutoCAD, SolidWorks 3D solid modeling, prototype animation.
· Assembler, C++, QBasic, and Visual Basic programming.
Prototype of electronic circuits, Electronic enclosure design, and electro-mechanical devices including pneumatic, hydraulic, optical and drive type actuators.

EDADOC High Speed PCB Design Center
CONTACT: Axiao
PHONE: 086.755.26995236
FAX: 086.755.26995358
E-MAIL: axiao@pcbdoc.com
www.pcbdoc.com
ADDRESS: China Academy of Science & Technology Development,
Hi-tech Industrial Park, Shenzhen, CHINA
CATEGORIES: Printed Circuit Design & Layout
We are specialized in high speed PCB layout,signal simulation. All of our engineers have 4 years experience in high speed PCB design. Cost-effective, high quality and short delivery time for your PCB design service.

Electronic Product Development, Inc. / Conversion Factors Software
CONTACT: Dan Judd
PHONE: 918.825.9300
FAX: 918.825.9395
E-MAIL: danjudd@epdcorp.com
www.edaxchange.com
ADDRESS: 4 South Vann St.
Pryor Creek, Oklahoma 74361
CATEGORIES: PCB Layout and Design Software, Data Conversion Services, CAD/CAM Services, Printed Circuit Design and Layout, Data Conversion Software
CFI produces Netlist, Schematic and PCB conversion software for Cadence, Cadstar, Mentor, Orcad, PADS, PCAD, Tango, Veribest, Viewlogic and Protel.
CFI also performs in-house translations of Schematics and PC Boards, for Accel EDA, Cadence, Cadstar, Mentor, Orcad, PADS, PCAD, Tango, Veribest, Viewlogic and Protel.
CFI also performs conversion of legacy gerber files to modern PCB designs.

Emerald Coast Circuits, Inc.
(Formerly Merriwether Circuit Design, Inc.)
CONTACT: Charles Merriwether
PHONE: 850.243.8144
FAX: 850.243.2050
E-MAIL mcdi@merriwether.com
www.merriwether.com
ADDRESS: P.O. Box 1526
Fort Walton Beach Florida, 32549-1526
CATEGORIES: Printed Circuit Design, Artwork Scanning, Photoplotting, Data Conversion, Front-End Engineering
Emerald Coast Circuits, Inc. is a service bureau dedicated to providing quality service to the printed circuit board process. Since our formation in 1976, ECCI has established one very important goal..."always consider the
customer's needs." Speed and accuracy play a most important role in our daily activities.
Emerald Coast Circuits, Inc. is prepared to respond to today's customer by maintaining dependable equipment and dedicated employees.
Our capabilities are presented for your review.
Design Service:
Fast and accurate layout of circuitry, from analog circuits to high density fine line circuits to surface mount circuits, is performed on our Hewlett Packard and PCAD workstations. And we now also use Accel EDA (P-CAD PCB) design software. Schematic capture is also available.
Scanning Service:
A database can now be captured from your artwork, paperplots, or bareboard. Our Icon Scan system can provide you with an alternative to printed circuit redesign at a much lower cost.
Photoplotting Service:
Same day photoplots are a reality with our Gerber Model 9720 Laser Photoplotter. Our fast service and low prices make ECCI very competitive in responding to the customer's plotting needs.
Panelization Service:
With our panelization software, ECCI can now provide panelized film within 24 hours. Drill and route files are provided to complete the panelization package.
Database Conversion:
ECCI can support you with many types of file conversions. A database, intelligent with symbols and connectivity, can be provided in many design formats.

E-M Designs, Inc.
CONTACT: Cliff Gerhard, P.E.
PHONE: 949.661.3016
E-MAIL: infoee@emdesigns.com
www.gerhardeng.com
ADDRESS: 28 Monarch Bay Plaza, Suite F,
Dana Point, California 92629
CATEGORIES: Printed Circuit Design and Layout
Over 20 years experience in the design of printed circuit boards, including boards for consumer products, industrial controls, spacecraft, aircraft, ground vehicles, and medical instruments.
Service Provided: Range from simple fixed price PCB layouts to complete product development from concept to production.
Specialties include layouts for - High Voltage, High Current, High Frequency, High Density and Controlled Impedance.
Supported Software: Mentor, Protel, PADs, OrCAD and many other popular CAD packages.

Engineering Graphics
CONTACT: James Baughman
PHONE: 724.745.8697
FAX: 724.745.4167
MODEM: 724.745.4167
E-MAIL: sales@engineeringgraphics.com
www.engineeringgraphics.com
ADDRESS: 2125 West Pike Street
Houston, Pennsylvania 15342
CATEGORIES: Printed Circuit Design, Fabrication and Assembly
Engineering Graphics is celebrating twenty-two years of printed circuit design and prototype development services.
Incorporated in 1982, the company has designed and built over 3,000 unique printed circuit boards for nearly 200 clients in 15 states and three foreign countries. These 3,000 unique designs have replicated into hundreds of thousands of circuit boards that are at this moment performing their functions in medical devices, test and measurement instrumentation, material handling systems, industrial controls, navigation and guidance equipment, telecommunications, space exploration, and defense electronics.
Since their formation, they have acquired a substantial amount of CAD/CAM equipment including Gerber, Cadnetix, Pads Power PCB and Veribest (Mentor Graphics) workstations which has positioned them as highly respected, technologically-advanced design and prototyping service for electronic product manufactures, educational institutions, and research and development facilities.
Engineering Graphics provides computer-assisted printed circuit design, fabrication and assembly of a wide range of high-speed digital circuits or noise-sensitive analog circuits incorporating rigid, rigid/flex, thru-hole, SMD, TAB, COB, strip line, and micro strip technologies. This organization has been honored to assist both the small entrepreneurial start-up companies and the very large organizations such as Alcoa, AT&T, Bayer, Cutler-Hammer, GE, Kodak, MSA, Lucent Technologies, NASA, PPG, Rockwell, United Technologies and Westinghouse. Engineering Graphics is a class "A" design/build firm with a substantial amount of experience in printed circuit board design, fabrication and assembly technologies.

Engineered Systems Incorporated
ADDRESS: 395 Sunnyside Blvd., LaSalle, Ontario, Canada N9J 3J5
(Beside Windsor and only 15min. away from Detroit)
CONTACT: Michael Levesque, President & CTO
PHONE: 519.978.3031
FAX: By inquiry only, call first
E-MAIL: mike@engsysinc.com
www.engsysinc.com
CATEGORIES:
Assembly Services / Contract Manufacturing / Project Management & Turnkey Services
Cable & Wire Harness Assembly
Engineering Services / Systems Integration / Programming
Plastic Injection / Compression / Mold Design / Product Design and Printed Circuit Design & Layout

Complete product design from concept to manufacture. Engineered Systems Incorporated is part of the networked companies forming the Engineered Systems Group of Companies which provide not only engineering services but also prototyping, graphics, marketing, packaging, testing and development, purchasing and logistics. With several tool shops, moulding facilities, electronic assembly, chemical applications systems, specialized printed circuit manufacture and complete fabrication systems under one umbrella; Engineered Systems Incorporated provides the same capabilities as the larger competition at prices truly competitive with both overseas and large scale manufacturing centers within North America.
 
Engineered Systems Incorporated utilizes only the finest tools to produce conceptual products for clients and then take them from an ideological state and produce real world products. We specialize in complete product development, prototyping and manufacturing. From integrated printed circuit assemblies to plastic enclosure, Engineered Systems Incorporated not only provides design and technical services but also provides OEM capability for electronic prototyping, assembly and test, plastic mold design, injection, and thermoforming, die design, metal forming and stamping, metal fabrication and assembly, fixture and gauge construction, cable harness design and assembly, purchasing and component distribution in addition to a worldwide link of resources in North America, Europe and China. Engineered Systems Incorporated is constantly recognized as a world leader in constructive planning, development, and effective project execution with the highest results; achieving the highest return on investment and continued delivery of excellence. While small, Engineered Systems Incorporated is a world class company that is just the right size to be responsive, agile, and results oriented. Visit our website and contact us today regarding your requirements. We are members of IEEE, OACETT, SMTA and the IPC Designers Council.

Click here to see an example of a 3D rendered assembly drawing done by Engineered Systems Incorporated

Essex Technology
CONTACT: Christopher Jay
PHONE: 408.226.6048
FAX: 408.226.6923
E-MAIL: jaydata@aol.com
ADDRESS: 216 Arbor Valley Court
San Jose, California 95119
CATEGORIES: PCB Design, Engineering
Electronic Systems Design, Schematic Capture, PCB Layout, Board Manufacture,
Assembly, Test, PLD and FPGA Design and Programming, Microprocessor Assembly and "C" Program Development, Mechanical Enclosures and Assembly

Express Engineering Services
CONTACT: Mark Littleton
PHONE: 805.604.1414
FAX: 805.604.0714
E-MAIL: pcbcad@expressengineeringservices.com
www.expressengineeringservices.com
ADDRESS: 1611 Almanor Street,
Oxnard, California 93030
CATEGORIES: Printed Circuit Design & Layout
We are a printed circuit board (PCB) computer aided design (CAD) service offering express turnaround while maintaining the best quality, dependability and pricing in the industry. Specializing in Mentor Graphics, Pads PowerPCB/Blazeroute, Cadence Specctra, Downstream Technologies CAM350.

Flex Circuit Design Company
CONTACT: Tom Woznicki
PHONE: 408.629.8343 or toll free at 1.888.353.9626
FAX: 408-629-5545
E-MAIL: TWoznicki@aol.com
www.flexdude.com
ADDRESS: Silicon Valley, California
CATEGORIES: Printed Circuit Design & Layout, Publications & Online Magazines
We do two things at Flex Circuit Design Company:
* Design flex circuits for OEMs and flex manufacturers.
We are the foremost service bureau in the western USA specializing in flex circuit design. - Click here for more
* Publish The Flex Circuit News - the best magazine about flex circuits and the flex circuit industry! It's free -
subscribe today!

Flextronics International Ltd.
CONTACT: Sales
PHONE: 408.576.7000
FAX: 408.576.7454
E-MAIL:info@flextronics.com
ADDRESS: 2090 Fortune Drive
San Jose, California 95131
www.flextronics.com
CATEGORIES: Assembly, PCB Design, Engineering, Turnkey
Manufacturing services:
Full System Build, Electromechanical Assembly, Cable Assembly, Plastic Injection Molding, PCB Assembly, ICT/Functional/ESS and Systems Test, Distribution, Warranty Services .
Engineering services:
Product Design, RF Engineering, Mechanical Engineering, Test Development, PCB Layout and Design, MCM Design and Manufacture, ASIC and IPC Design, Advanced Technology Assembly, Prototyping, Design for Manufacture.

Gator-CAD, Inc.
CONTACT: Gregg M. Connary
PHONE: 561.704.2445
FAX: 561.733.8679
E-MAIL: gconnary@gatorcad.com
FTP ADDRESS: ftp.gatorcad.com
www.gatorcad.com
ADDRESS: 8389 Elaine Drive,
Boynton Beach, Florida 33437
CATEGORIES: Printed Circuit Design & Layout, Engineering Services
Gator-CAD is an independent service bureau providing creative Printed Circuit Board (PCB) artwork designs and their respective documentation. We provide innovative, top-quality designs using the latest tools that help our customers improve productivity and decrease engineering cycle times. We pride ourselves in excellent customer service and our commitment to quality.

Golden Gate Graphics
CONTACT: John W. Childers
PHONE: 720.276.9127
FAX: 866.424.9086
E-MAIL: tr2@goldengategraphics.com
www.goldengategraphics.com
ADDRESS: P.O. Box 3322
Littleton, CO 80161-3322
CATEGORIES: Printed Circuit Design & Layout
(Also see GGG's Industry forum (archive) & Glossary of Printed Circuit Design and Manufacturing)
If you're an electronics design engineer, you deserve a competent, trustworthy printed circuit board designer. Our designers follow a standard policy which eliminates at least 90% of artwork mistakes by its simple application alone. And as for the other 10%, we use good design practices which practically close the door on any possibility of botched-up artwork. You get a printed circuit board that matches your schematic and follows your own guidelines for what you want done.
For more information on our services please visit our web site!

HAMP High Speed PCB Co.,Ltd.
CONTACT: Mr. Wang
PHONE:086-755-26605776
FAX: 086-755-26605776
E-MAIL: wcj@hamppcb.com
www.hamppcb.com/en (web page in both English & Chinese)
ADDRESS: Haijing Garden Huaqiaocheng, Nanshan District,
Shenzhen City, Guangdong Province, China
CATEGORIES: PCB Design
Cost-effective High Quality High Speed PCB design Service, Signal Integrity Analysis.

Integrated Designs
CONTACT: David James; President
PHONE: 206. 276.5248
E-MAIL: david@4-pcb.com
www.4-pcb.com
ADDRESS: 13326 NE 137th Place,
Kirkland, Washington 98034
CATEGORIES: Printed Circuit Design & Layout, Printed Circuit Consultants
Integrated Designs offers quality printed circuits designed quickly and affordably. With over 10 years of direct pcb design experience, we provide companies with simple to complex pcb design services and manufacturing of prototypes. Services ranging from RF, controlled impedance, digital/analog, Flex circuits, ceramics, to as simple as single sided FR4 fiber PCB's are all very common to us.
We will beat any quote by at least 10%!

Integrated Sensor Technologies
CONTACT: Peter Honor
PHONE: 805.968.6600
FAX: 805.968.6600
E-MAIL: peter@isensortech.com
www.isensortech.com
CATEGORIES: Printed Circuit Board Design
IST offers product engineering and design, from concept to finished product.
IST develops toxic and combustible gas detection systems.

Jardon Engineering Inc.
CONTACT: Scott McCurdy
PHONE: 714. 838.3311
FAX: 714.838.4702
E-MAIL: scott@Jardon.com
www.jardon.com
ADDRESS: 17621 Irvine Blvd.,
Tustin, California 92780
CATEGORIES: Printed Circuit Design & Layout
Established in 1969, Jardon Engineering Inc has earned the reputation as a leader in PCB interconnect design and layout. We utilize Cadence Allegro for PCB layout and all designs are validated through Valor for DFM checking.
Our technology expertise includes:
• Extreme high density designs
• Industry Leader in Signal Integrity design and analysis
• High speed designs (currently 2 to 10+ Gbps)
• High Speed and complex Backplanes
• MicroTCA & ATCA - PICMG 3.x design development
• CompactPCI - backplanes and daughter cards PICMG 2.x
• VME/PCI backplane, mother boards and daughter cards
• Flex/ Rigid Flex
• Blade servers
• Analog and RF boards
Jardon also provides signal analysis and simulation, PCB fabrication and assembly services for a one PO solution.

Knox Associates Design
CONTACT: Allan Knox
PHONE: 408.292.3645
FAX: 408.564.0257
E-MAIL: Aknox90210@aol.com
www.knoxassociatesdesign.com
ADDRESS: 798 N. 4th Street,
San Jose, California 95112
CATEGORIES: Printed Circuit Design & Layout
Circuit design, testing, engineering

Labtam Pty. Ltd.
CONTACT: Charles Makarewicz
PHONE: 61.3.9580.5911
FAX: 61.3.9587.4986
E-MAIL: charles@labtam.com.au
or see: www.labtam.com.au for complete e-mail list
www.labtam.com.au
ADDRESS: 33 Malcolm Road (P.O. Box 826) Braeside
Vic 3195 Australia
CATEGORIES: Turnkey Services, PCB Design, PCB Manufacturing and Engineering services
Manufacturing Capability:
* Surface-mount and through-hole p.c. board assembly
* Prototype to high volume production
* Packaging and distribution
* Product test and burn-in
* Box-build and system integration
* Warranty and repair services
* Manufacturing Equipment Specification
* Standard Terms and Conditions
Quality Assurance:
* Consultation ISO 9002
R & D:
* Design, manufacturing and engineering services - Design for manufacture (DFM)

Lintelle Engineering
CONTACT: Bill Turner
PHONE: 831.439.8400
FAX: 831.439.8475
E-MAIL: bill@lintelle.com
www.lintelle.com
ADDRESS: 380 El Pueblo Drive, Suite 105
Scotts Valley, California 95066
CATEGORIES: Turnkey, Engineering, PCB Design
Lintelle Engineering has been in business for over nine years. With more than twenty years of experience in the Silicon Valley electronics industry, we are dedicated to providing the highest quality manufacturing and engineering services. We have served large and small companies alike throughout the United States.

Manufacturing Services Full turnkey or kits, 100% tested assemblies, based on ISO-9000 quality standards, tooling for any job, qualified sub-contractors for sheet metal, machined parts, plating, painting, PCB fabrication, labeled with serial number, date code, part number, revision level, engineering evaluation, first articles, quick turn.

Mindlink Technologies
CONTACT: Ron Olinyk
E-MAIL: design@mindlinktech.com
www.mindlinktech.com
CATEGORIES: PCB Design, Programming Services
PCB, schematic and mechanical design and various related services;
VB programming to integrate CAD applications through OLE automation.

MPC Design Technologies, Inc.
CONTACT: Steve Castillo
PHONE: 505.298.1348
FAX: 505.298.5576
E-MAIL: mpcdt@mpcdt.com
ADDRESS: 1524 Eubank Blvd. NE, Suite 1
Albuquerque, New Mexico 87112
www.mpcdt.com
CATEGORIES: Engineering, PCB Design, Assembly, Fabrication
MPC Design Technologies, Inc. MPC has established itself as a complete support facility in the electronics corridor from Design and Layout through Consignment of Full Turnkey Assembly. We place a great importance on quality, functionality and doing the job right the first time. Our commitment is to provide you with the best support possible by any Design and Contract Manufacturer anywhere in today's market. We have successfully Designed, Fabricated, and Assembled many field-buss boards from Back Planes, ISA, Mezzanine IP, PC-Mother Boards, PCI, VME, VXI, to Custom stand alone Printed Circuit Boards (PCBs). We adhere to your requirements and specifications. Our in house Quality Standard is IPC-D-275 for Design and Layout, IPC-A-600, 6012 or MIL-P-55110 for board Fabrication, and IPC-A-610 for Assembly.

MB DESIGN
CONTACT: Matthew Broo
PHONE: 765-452-6642
FAX: 765-457-1562
E-MAIL: mbdesign@insightbb.com
www.tedweber.com/mbdesign
ADDRESS: Kokomo, Indiana 46902
CATEGORIES: Printed Circuit Design, Layout , Assembly Services / Contract Manufacturing / Project Management & Turnkey Services, Cable and Wire Harness / Assembly
Design and production of printed circuit boards, complete turn-key product production, will drop ship to customer, specialized custom cable fabrication.
PCB assembly & parts procurement.

MV Circuit Design Inc.
CONTACT: Markos P Paradissis
PHONE: 440.967.9853
FAX: 440.967.6813
E-MAIL: sales@mvcircuit.com
FTP ADDRESS: ftp.mvcircuit.com
www.mvcircuit.com
STREET ADDRESS: 8011 Risden Rd.
Vermilion,Ohio 44089
CATEGORIES: Printed Circuit Design & Layout
MV Circuit Design Inc. has 50 years combined experience in PCB Layout to Manufacturing with all facets of design.
With our knowledgeable staff we offer a turnkey solution from concept to production.
MV Circuit Design has the resources and experience to accommodate yearly contracts at a competitive rate with quick turn solutions to all your needs.
MV Circuit Design Inc. can support your data in many software formats, call for information. We are fully capable of supporting Theda and Schedit users legacy data while your company is in transition to a new software package or with present needs.

Optimum Design Associates
CONTACT: Greg Beck
PHONE: 925.401.2004 x103
FAX: 925.401.2010
E-MAIL: sales@optimumdesign.com
www.optimumdesign.com
ADDRESS: 1075-B Serpentine Lane,
Pleasanton, California 94566
CATEGORIES: PCB Design & Layout, Assembly Services
Optimum Design Associates, Inc. -PCB Performance Designs©
At ODA, we offer high quality printed circuit board design solutions that meet or exceed all electrical and mechanical constraints.
We take into consideration real-world manufacturing and test requirements that face engineers.
Services Provided:
PCB layout
Mentor Graphics library administration
Engineering for complete project development
Industrial Design-sheet metal, plastics, cooling, Pro/Engineer
FPGA design & development
Design Tools
Mentor Graphics Expedition(tm)
PADS Power PCB
Cadence-Allegro
Protel
Library and Administration Services
Cell library database for Mentor Graphics, Expedition
Library Administration services
PCB Fabrication and Assembly Service
We provide project management for pcb fabrication & assembly services, ensuring a quality result on your next program.

Orlin Technology
CONTACT: Richard Rooney
PHONE: (+353).87.6742532
FAX: (+44).87.00940842
E-MAIL: info@orlin.com
www.orlin.com
ADDRESS: 1 The Sycamores, Rolestown,
Kilsallaghan, County Dublin, Ireland
CATEGORIES: Printed Circuit Design & Layout
PCB Design from Concept to Product.
We can perform all phases of the PCB Design process:
* Schematic Capture
* Part Creation
* PCB Layout (1-16 layers, FP SMT, BGA, etc.)
* Manual and Automatic Routing
* DFM/DFT Analysis
* Component Sourcing
* Prototyping
* Debug
* Small to Medium Batch Production
We use Mentor (Innoveda/PADS) and Cadence (Specctra Tools).

We have over 20 years of both Design and Manufacturing experience.
Location not important - we have customers on all continents !
Email (info@orlin.com) or call Richard Rooney (+353-1-876742532) to discuss your requirements.

P.C. Unique
CONTACT: Mark Gomez
ADDRESS: 3812 204TH Avenue NE
Redmond, Washington 98053
PHONE: 425.836.3232
FAX: 425.836.3222
CATEGORIES: PCB Design

PLTc bv
CONTACT: Wim Creyghton
PHONE: +31172574666
FAX: +31172573038
E-MAIL: info@pltc.nl
www.pltc.nl
ADDRESS: Nieuwveenseweg 21-c,
2421LA, Nieuwkoop, The Netherlands
CATEGORIES: Printed Circuit Design & Layout
PLTc bv, the #1 design house for printed circuit boards in Europe.

Precision Electronics Limited
CONTACT: Sales
PHONE: +91.120.2551556/57/58, 2555176/77
CELL: +91.120.2524337
E-MAIL: info@pelindia.com
www.pelindia.com
ADDRESS: D-10, Sector-III
NOIDA-201301, Gautam Budh Nagar
Uttar Pradesh, India
CATEGORIES: Printed Circuit Design & Layout
PCB Design Services & PCB Layout Services in India
Precision Electronics - offers premium PCB design services and mobile data communication in India serving as a leading manufacturer of mobile radio communication equipments using latest technologies.
"Building Business Value Through Technology"

PWB America, Inc.
CONTACT: Henry Uechi
PHONE: 714.695.0397
FAX: 714.695.0457
E-MAIL: uechi@pwbameica.com
www.pwbamerica.com
ADDRESS: 5120 E. La Palma Ave., Suite 208,
Anaheim California 92807
CATEGORIES: PCB Design & Layout
With our combined overseas power of 40+ PCB Design Engineers we are capable of designing from your schematic the most complex/High speed board with very quick turn around time.
We specialize in Hand Routing for High Density, High Voltage & Fine Pitch Boards.
From Orcad schematic capture, Simulation for Transmission Line Analysis, Board Design using Cadence Allegro (all versions), CAM & Rule Check, Fabrication, Assembly and Test we are able to give you a complete PCB Prototype or Reproduction Service with competitive pricing!
Please contact us for a RFQ today! e-mail: sales@pwbamerica.com

Quadra Solutions Ltd.
CONTACT: Kevin Doherty
PHONE: +44.1254.301888
FAX: +44.1254.301323
E-MAIL: webqueries@quadrasol.co.uk
www.quadrasol.co.uk
ADDRESS: Ewbank House, Cannon Street,
Accrington, Lancashire BB5 1NJ U.K.
CATEGORIES: Printed Circuit Design & Layout
Quadra Solutions Ltd. is of the UK's leading CAD solution providers. We offer a highly credible, single source solution to the increasingly complex needs of both large and small system installations. At Quadra we specialize in the provision of engineering design solutions and are committed to offering a true value added engineering partnership. The staff at Quadra have over 30 years of expertise in the provision, implementation, and support of complex integrated design solutions. Quadra offers a technical support service with unprecedented levels of technical awareness and responsive customer focus.

Quantum CAD
CONTACT: Anna Bastek
PHONE: 01639 864646
FAX: 01639 864676
E-MAIL: info@quantumcad.co.uk
www.quantumcad.co.uk
ADDRESS: Quantum CAD, ECM2 Engineering Centre,
Margam, Port Talbot, SA13 2EZ UK
CATEGORIES: Printed Circuit Design & Layout
Quantum CAD - The most respected PCB Design brand in the UK!
Quantum CAD - PCB Design Services
At Quantum CAD we offer a complete, unique electronic and PCB design experience. At the forefront of the PCB design community we are committed to offering a comprehensive range of design services for almost any type of electronic product, from initial concept through to manufacturing. So whether you need assistance with:
    * Pre-design/Feasibility study
    * Technically complex design issues
    * Unexpected peaks in design demands
    * Entire programme or project management
    * click here to see the list of our services

Reliant Electronic Design Services P. Ltd. (Reliant EDS)
CONTACT: Mr. Ritesh Patel
PHONE: 91.80.25217110, 91.9341247583
FAX: 91.80.25279741
E-MAIL: ritesh@reliant-eds.com, sales@reliant-eds.com
www.reliant-eds.com
ADDRESS: 4/1, Vittal Villa, 14th ‘A’ Main,
HAL 2nd Stage, Bangalore, India 560008
CATEGORIES: Printed Circuit Design & Layout & Analysis Services
Reliant Electronics Design Services Pvt. Ltd., a company engaged in providing state of art PCB Design services. Reliant, with offices in Delhi & Bangalore, India probably has the most advanced toolset for PCB Design which includes advanced modules for SI / High Speed Design, EMC, CAM optimization and library development services.
With a range of such tools we believe we can offer design qualities which are a quantum above whatever else is available today in this country. Our prices are also cheaper in compared to the existing vendors and our quality and turn around time is really aggressive.
We have most advanced set of tools from Zuken, Cadence, PCAD, & Mentor and also most qualified manpower to execute the project well within the specified time. We have our own quality procedures meeting international standards, we have our own reviews, checks and guidelines of doing the PCB design

Rocolec LTD
CONTACT: ALEX BARRETT
PHONE: (44)1603.879000
FAX: by arrangement only
E-MAIL: info@rocolec.com
www.rocolec.com
ADDRESS: Rocolec Ltd, Unit 10, Shepherds Business Park,
Norwich Road, Lenwade, Norwich NR9 5SG UK
CATEGORIES: Printed Circuit Design & Layout
Electronic design services

Saturn PCB Design, Inc.
CONTACT: Kenneth Wood
PHONE: 407-340-2668
E-MAIL: sales@saturnpcb.com
www.saturnpcb.com
ADDRESS: 2737 Bishop Lane,
Deltona, Florida 32765
CATEGORIES: Printed Circuit Design & Layout
Saturn PCB Design has been designing top quality printed circuit boards since 1994.
Our specialties include RF layouts for the communications and test / measurement fields, dense microprocessor designs for commercial use as well as space flight designs with NASA and military backgrounds.
We offer competitive rates, quick turnaround time and a personal commitment to meet your design needs.

SFD Solutions by Design
CONTACT: Steve Fairhead
PHONE: +44 (0) (1273) 706215
FAX: +44 (0) (1273) 774203
E-MAIL: info@sfdesign.co.uk
ADDRESS: 36 Livingstone Road, Hove,
East Sussex BN3 3WP, UK
www.sfdesign.co.uk
CATEGORIES: PCB Design, Engineering
SFD is a microelectronics design consultancy founded by and based around the skills and experience of Steve Fairhead. Capacity is flexible; we have access to specialists in many fields as and when required. We believe our strengths lie in good project management,in a meticulous design approach which results in effective quality levels far beyond the norm for the industry (especially in software design), and in an understanding of the need for maintainable (i.e. comprehensible & clear) designs.

Shane Consultants Ltd
CONTACT: Nigel Rowe
PHONE: +44 (0) 118.977.5397
FAX: +44 (0) 118.977.5397
E-MAIL: sales@shane-consultants.co.uk
www.shane-consultants.co.uk
ADDRESS: Office 2, Wokingham Town Hall, Wokingham,
Berkshire RG40 1AS U.K.
CATEGORIES: Printed Circuit Design & Layout
We Provide PCB and Mechanical Design Services, using Cadence Allegro, Protel and Autocad. Also schematic layout in ORCAD, Protel and Concept. As well as assembly and manufacture for a full design solution.

We design High speed, RF and microwave boards for the Broadcast, Telecommunications, Defence and Telemetry Industries. Loadboard,
Probeboard and Evaluation Card design for Semiconductor Testers, working directly with the Tester Manufacturers and a number of Fabless Companies and Test Houses.

We have experience in a wide range of Technologies:
* Mixed Signal
* Microwave and RF
* Bluetooth etc.

Our Clients include:
Teradyne, CSR, LTX, Stats, Atlantic, Salland, Alcatel (AMIS), Zarlink, Philips, Ericsson, ARM, 3Com, Fujitsu, Semtech, Picochip, IBM and
ST Microelectronics.

Although we are based in the UK, we have completed projects with customers in the USA and mainland Europe.

Other services: Printed Circuit Consultants, Printed Circuit Board Manufacture Services

Shared Resources
CONTACT: Tony Stemberger
PHONE: 408.513.4499
FAX: 408.629.5474
E-MAIL: tony@shared-resources.org
www.shared-resources.org
ADDRESS: 1880 Hartog Drive,
San Jose, California 95131
CATEGORIES: Printed Circuit Design & Layout
PCB Design services done on or off site. Complete Engineering Services team for Start-ups - our instant support team will provide design and document control during initial development stage, while putting in place your permanent department.
Productivity tools for proto-type purchasing.
Fabrication and Assembly services.

Silicon Valley Technical Institute
CONTACT: Ali Iranmanesh
PHONE: 408.573.0100
FAX: 408.573.0200
E-MAIL: alii@svtii.com
www.svtii.com
ADDRESS: 1762 Technology Drive, Suite 227,
San Jose, California 95110
CATEGORIES: Printed Circuit Design & Layout
Silicon Valley Technical Institute (www.svtii.com) provides premium PCB/PWB design and layout services at competitive prices.
SVTI expert staff are proficient in using advanced tools from leading EDA companies and realize your design with outmost focus on details and quality. SVTI is an IPC member.
Interested parties should send requests to info@svtii.com.

Spectrum Integrity, Inc.
CONTACT: Michael Ingham
PHONE: 805.426.4267
FAX: 805.426.8147
E-MAIL: info@spectrumintegrity.com
www.SpectrumIntegrity.com
ADDRESS: 2146 Bigelow Ave.,
Simi Valley, California 93065
CATEGORIES: Printed Circuit Board Design and Layout
Spectrum Integrity specializes in High-Speed, RF, and Microwave PCB design and fabrication. They are experienced with up to 65GHz broadband designs and quick turns requiring limited hand-holding. Spectrum Integrity can provide assistance with flex circuit design, chip-on-board, high-frequency test sockets, cavity boards, metal-backed boards, and product demonstration boards. Their designs are noted for both outstanding performance and excellent cosmetic appeal.

Stilwell Baker, Inc.
CONTACT: Darrel Baker
PHONE: 503.885.1231
FAX: 503.885.0550
E-MAIL: info@stilwellbaker.com
www.stilwellbaker.com
ADDRESS: 18735 SW Boones Ferry Road
Tualatin, Oregon 97062-3090
CATEGORIES: Printed Circuit Design & Layout
Stilwell Baker, Inc., provides highly skilled onsite contract resources for Printed Circuit Design in the electronics industry. Stilwell Baker designers have a proven track record of reducing design cycle time for tough designs, as well as design for cost--from high-speed, high-density, multi-gigabit signaling, to low cost/high volume designs that maximize testability and manufacturability.

Since 1996, Stilwell Baker has earned a reputation for providing exceptional talent with deep technology expertise and who focus exclusively on superior value delivery to the customer. The onsite model enables our designers to integrate directly into the customer’s design environment, resulting in better communication, faster response, and ultimately, better performance.

Sunman Engineering, Inc.
CONTACT: Allen Nejah
PHONE: 408.441.1500
FAX: 408.441.7900
E-MAIL: allen@sunman-engineering.com
ADDRESS: 2635 North First Street
San Jose, California 95134
www.sunmantechnology.com
CATEGORIES: PCB Design, Engineering
The SunMan Engineering staff can perform the engineering tasks specifically needed in Electronic and Mechanical applications. We provide High Quality and Cost-efficient engineering services from design to manufacturing.
Click here for video presentation

Tech Serv
CONTACT: Sales
PHONE: 408.369.7950
FAX: 408.369.7952
E-MAIL: info@techservinc.com
ADDRESS: 2998 S Bascom Ave. Ste 202
San Jose, California 95124
www.techservinc.com
CATEGORIES: Printed Circuit Design
TechServ delivers state of the art printed circuit design services to the electronics industry. From your schematics (hand drawn or electronic data), we will engineer a printed circuit layout to your exact specifications.
As our name implies, service is our business. We know that if you are pleased with our service, you will also be happy with our product. Your satisfaction is of the utmost importance to us, just ask our customers (we'll be happy to let you speak with them).
In addition to fine service, we deliver:
Top quality Protel(TM) based designs and layouts
Full documentation including print or plots of all artwork
All electronic data files including databases, libraries and CAM files
Free software to allow you to view, print, plot, and query your data files
We can also:
Provide films
Quick turn your designs
Broker turnkey PCB assemblies
Over see the fabrication and assembly process
Translate your older or obsolete design databases
Author EDA tools to enhance your in-house design team

Texas PCB Design
CONTACT: Jon Rosser
PHONE: 210.867.6790
E-MAIL: jrosser@texaspcb.com
www.texaspcb.com
CATEGORIES: Printed Circuit Design & Layout
San Antonio, Texas area printed circuit board design and layout bureau.

Trident-Enterprises
CONTACT: Joe Sapienza
PHONE: 978.580.4016
FAX: 240-384-0706
E-MAIL: Trident-Enterprises@pobox.com
www.Trident-Enterprises.com
ADDRESS: 215 So. Broadway #116
Salem, New Hampshire 03079
CATEGORIES: Printed Circuit Design & Layout
We offer a complete PCB layout service with the customer in mind. Services: from PCB design, concept through schematic capture to PCB layout. On completion of your board design we will provide a comprehensive package containing everything needed for the fabrication and populating of your printed circuit board. We specialize in Designs done right the first time, on time, every time.
A virtual and paperless environment.

Xtera Design Services, Inc.
CONTACT: Tim Cook
PHONE: 954.294-2672
FAX: 954.827-0794
E-MAIL: TCook@XteraDesign.com
www.XteraDesign.com
ADDRESS: 4613 N. University Drive
Coral Springs, Florida 33067
Categories: Printed Circuit Design and Layout
Xtera Design Services offers a full range of Printed Circuit Board design, Mechanical design, Electrical design, fabrication and manufacturing services. To ensure the successful completion of our customers' designs, we operate as an extension of their design team.

	Web www.everythingpcb.com

---

[Previous]  [Next]  [Up]  [Home]  

---