Gerber Editors / Viewers, Data Conversion & Translation Software

Cad Design Software
CONTACT: Sales
PHONE: 408.436.1340 / 877.CAD.USER (877.223.8737)
E-MAIL: sales@cad-design.com
www.cad-design.com
ADDRESS: 1731 Technology Drive, Suite 340,
San Jose, California 95110
CATEGORIES: CAD/CAM, Gerber Editors / Viewers, Data Conversion & Translation Software,
PCB Layout / Design / Schematic Capture / Autorouting Software
CAD Design Software produces Electronic Design Automation layout software that utilizes very advanced 2D and 3D graphics capabilities for the RF/Microwave PCB, Flex, Hybrid/MCM, and IC packaging industries. EPD, also known as Electronics Package Designer, is the core design engine in all CAD Design Software’s design suites. Each suite is tailored for specific technologies and industries. The result is faster, more accurate designs than are possible with other “Design Automation” tools.

Cimmetry Systems, AutoVue
Multiple Format File Viewer
www.cimmetry.com
Supported Formats:
3D / 2D CAD & Vector-Based Engineering
Electronics Design
Raster Based Engineering
Hybrid Engineering
Vector Graphics
Raster and Bitmap
Fax
Word Processor
Database
Spreadsheet
archived

CircuitPeople LLC
CONTACT: N/A
PHONE: N/A
FAX: N/A
E-MAIL: N/A
www.circuitpeople.com
CATEGORIES: Gerber Editors / Viewers, Data Conversion & Translation Software
The CircuitPeople web page is an online Gerber viewer which allows you to upload and view individual or multiple zipped Gerber files.
Registering with CircuitPeople will allow you to store files on their site and share them with other members.

Electronic Product Development, Inc. / Conversion Factors Software
CONTACT: Dan Judd
PHONE: 918.825.9300
FAX: 918.825.9395
E-MAIL: danjudd@epdcorp.com
www.edaxchange.com
ADDRESS: 4 South Vann St.
Pryor Creek, Oklahoma 74361
CATEGORIES: PCB Layout and Design Software, Data Conversion Services, CAD/CAM Services, Printed Circuit Design and Layout, Data Conversion Software
CFI produces Netlist, Schematic and PCB conversion software for Cadence, Cadstar, Mentor, Orcad, PADS, PCAD, Tango, Veribest, Viewlogic and Protel.
CFI also performs in-house translations of Schematics and PC Boards, for Accel EDA, Cadence, Cadstar, Mentor, Orcad, PADS, PCAD, Tango, Veribest, Viewlogic and Protel.
CFI also performs conversion of legacy gerber files to modern PCB designs.

Expedient Viewing Technologies, Inc.
CONTACT: Sales
PHONE: +1 902.444.9588
FAX: +1 902.444.9588
E-MAIL: sales@evtview.com
www.evtview.com
ADDRESS: 103-287 Lacewood Drive, Suite 263,
Halifax, Nova Scotia, B3M 3Y7 Canada
Software: Gerber Editors / Viewers, Data Conversion & Translation Software
Expedient Viewing Technologies, Inc. (EVT) is well known for its success in providing cutting-edge creative solutions for visualization and conversion of GDSII, Gerber, and DXF file formats. Today, EVT develops and releases a powerful array of EVTView software packages and their cusomatization. Our software lets companies reduce complexity in file conversion and cut corresponding costs by substantial amount. EVT is the most dynamically developing company in the niche and is set to deliver the best software solutions

GerbMagic by Bronzware
RegSoft.com Inc.
CONTACT: Sales
PHONE: toll-free (only in the U.S.) 1-877-RegSoft.com, or 1-877- 734-7638
(International Customers should dial +1-770-319-2718).
Atlanta, Georgia customers may also dial 770-319-2718
EMAIL: sales@RegSoft.com
www.bronzware.com/GerbMagic
ADDRESS: PMB 201,
10820 Abbotts Bridge Road, Suite 220
Duluth, Georgia 30097
CATEGORIES: CAD/CAM, Gerber Editors, Data Conversion & Translation Software / Software Shareware
GerbMagic is a vector converter from Gerber RS-274x data to PostScript and PDF. Also a high resolution Software RIP(Up to 30,000 DPI) for Gerber data to TIFF, BMP, RID format. A lot of Gerber files can be grouped onto a single page in WYSIWYG(what you see is what you
get) fashion. The whole page can then be converted to a selected format.
More output formats will be supported in future releases.

Note:
GerbMagic is distributed as shareware. you are licensed to use GerbMagic for evaluation purposes without charge for 20 times (Start/Close the program 20 times). After the 20 times, It will turn into a free Gerber viewer.

Numerical Innovations, LLC
CONTACT: Sales
PHONE: 858.272.9952
FAX: 858.430.2705
E-MAIL: sales@numericalinnovations.com
www.NumericalInnovations.com
ADDRESS: 4660 La Jolla Village Drive, Fifth Floor #50028,
San Diego, California 92122
CATEGORIES: Software: Gerber Editors / Viewers, Data Conversion & Translation Software - Design for Fabrication Software
Numerical Innovations, LLC was founded on the industry need for easy to use commercial and custom EDA tools that are aesthetically pleasing and clever that accurately facilitate electronic designs for manufacturing.
Our products include:

* Visual Chip-Inspector 2007
An easy to use, high-speed GDSII, OASIS, LEF/DEF Analysis and Inspection system - A Perfect tool for any designer, engineer, or FA (Failure Analyst) who wants to review physical layouts as quickly as possible with as many features as possible. For Windows, Linux, and Solaris.

* Visual Chip-Mask 2007
Visual Chip-Mask satisfies the demand for a design tool that incorporates high-speed display, easy integration with existing tools, and versatility throughout all phases from design to manufacturing. Since Visual Chip-Mask allows editing, users can check and fix identified errors in the same environment or use it as a layout tool for IC and MEMs designs with complex geometries. For Windows, Linux, and Solaris.

* ACE Translator 2007 - AutoCAD DXF
Low cost bi-directional translator from AutoCAD DXF to Gerber. For Analog, RF, Microwave and IC Packaging, chem milling etc. Includes a built-in Viewer to verify results! Runs on Windows, Linux, and Solaris.

* ACE Translator 2007 - DXF to GDSII
Low cost bi-directional translator between AutoCAD DXF and the Calma GDSII stream format. Includes a built-in Viewer to verify results! Runs on Windows, Linux, and Solaris.

* EasyGerb 2.1 for AutoCAD
EasyGerb is the ultimate Gerber export tool for AutoCAD users because it allows you to export Gerber files directly from AutoCAD - Simply select any objects and begin creating Gerber files - instantly! This tool is by far the most easiest-to-use Gerber conversion solution for any AutoCAD user. EasyGerb is an ObjectARX program designed to run inside all AutoCAD and LT Versions (2000-2007).

* Fab It! 2007
The only "Full-Featured" CAM editor that runs on Windows, Linux, and Solaris. Fab It! replaces the laborious and error-prone process of using "gerber viewers" to check your designs, by implementing our "world-class" bare-board analysis routines which instantly find and display all potential manufacturing problems. Fab It! can easily merge multiple pcb designs into a single set of CAM files to save you (up to 50%) on fabrication costs. Supports Files: Gerber, ODB++, Netlists, DXF, Postscript, HPGL, and more...

For further information on any of our products, please visit our web page or give us a call at 1-858-272-9952.

 
SolidWorks Corporation
CONTACT: Sales
PHONE: 1.800.693.9000 US and Canada / 1.978.371.5011 Outside the US and Canada
E-MAIL: info@solidworks.com
www.solidworks.com
www.dwggateway.com
ADDRESS:300 Baker Avenue,
Concord, Massachusetts 01742
CATEGORIES: Conversion & Translation Software / Demo, Shareware, Freeware & Trial Offer Software
No need to upgrade to the next version of AutoCAD® software
You do not have to upgrade your AutoCAD license to the new version of AutoCAD to be compatible with your DWG files.
Open and edit any DWG file using any version of AutoCAD
Eliminate the need to upgrade AutoCAD licenses just to be able to share work and collaborate with other AutoCAD users. DWGgateway™ is the first free data translation plug-in that lets AutoCAD users work easily with DWG files created by any version of AutoCAD software.
Create industry standard PDF documents from within AutoCAD
DWGgateway enables AutoCAD users to create PDF documents that can be shared with virtually anyone. DWGgateway includes Adobe® PDF Library technology. Adobe PDF is the de facto standard for electronic document exchange. More than one half-billion copies of its companion software, Adobe® Reader®, have been distributed worldwide, and the world's top 10 PC makers ship their systems with the application.

GerbView / Software Companions
E-MAIL: sales@softwarecompanions.com
www.SoftwareCompanions.com
CATEGORIES: Gerber Editors / Viewers, Data Conversion & Translation Software
GerbView® is an advanced but easy to use application that enables you to view, print, convert and markup Gerber, HPGL, Excellon and raster files. GerbView supports both RS274D and RS274X (with embedded aperture information) Gerber formats.
About
Software Companions is fully focused on developing powerful products for viewing, printing and conversion of file formats that are commonly used in the CAD/CAM market. We do also develop and sell components that are used in applications developed by other companies.
Software Companions was founded in 1997 in Oslo, Norway and is a privately held firm.

Viewplot by Roneda PCB Design Consultancy
CONTACT: Sales
PHONE: +31 (0)650 227 965 / Belgium: +32 (0)485 802 404
FAX: +31 (0)84 711 0276
E-MAIL: info@roneda.nl
www.viewplot.com
ADDRESS: Gaverlandstraat 31,
B-9120 Melsele, Belgium
CATEGORIES: Gerber Editors / Viewers, Data Conversion & Translation Software - Demo, Shareware, Freeware & Trial Offer Software
Viewplot is a CAD Viewer/Translator and Editor in one
Translate your CAD data in seconds, as standalone tool or integrated within existing CAD processes.
Viewplot allows you to inspect various CAD formats, take measurements and manipulate data.Create high resolution PDF documentation within the graphical user interface or in batch mode.
It is the most complete and inexpensive tool available on the market!
The Viewer is absolutely free and include the same functionality as the licensed version.
Viewplot can be used and shared by anyone needing to view & print electronics design and manufacturing data, as PCB Designers, PCB suppliers, Assemblers, Designers and Testers.

Wise Software, Inc.
CONTACT: Sales
PHONE: 503.554.8855
FAX: 503.554.1220
E-MAIL: sales@wssi.com
www.wssi.com
ADDRESS: 2700 E. 9th Street Suite 100,
Newberg, Oregon 97132
CATEGORIES: CAD/CAM, Gerber Editors / Viewers, Data Conversion & Translation Software
Wise Software, Inc. produces GerbTool, a full-featured CAM software system.

Here are some quick links to Shareware & Demo Gerber Viewers / Editors

GerbTool by Wise Software Solutions, Inc.

GcPreview by GraphiCode

CAM350 by DownStream Technologies

ViewMate by PentaLogix

PCB-View by Unisoft

GerbMagic by Bronzware

EVTView by Expedient Viewing Technologies

Viewplot by Roneda PCB Design Consultancy

Fab It! 2007 by Numerical Innovations

GerbView by Software Companions

	Web www.everythingpcb.com

---

[Previous]  [Next]  [Up]  [Home]  

---