EverythingPCB : Engineering Services / Systems Integration / Programming

Engineering Services / Systems Integration / Programming

Advanced Solutions Corporation
CONTACT: Nathan Meyer
PHONE: 641.357.8369
FAX: 641.357.1743
E-MAIL: nmeyer@advancedsolutionscorp.com
www.advancedsolutionscorp.com
ADDRESS: 13 Plaza Dr., Suite #2,
Clear Lake, Iowa 50428
CATEGORIES: Engineering Services / Systems Integration / Programming
Electro-Mechanical Product Design, Injection Molded Plastic Part Design, 2D and 3D Drafting, Circuit Board Layout, Technical Manual Drawings, Fixture Design and Assembly, Schematic Capture, Reverse Engineering, Micro-Controller Circuit Design, 2D and 3D Conversion, Agency Submittal Assistance, Prototype/Small Run Assembly

Core Source Technologies, LLC
CONTACT: Mike Keegan
PHONE: 301.540.9913 x18
E-MAIL: mkeegan@coresourcetech.com
www.coresourcetech.com
ADDRESS: 20410 Century Blvd. Suite 130
Germantown, Maryland 20874
CATEGORIES: Engineering Services
We offer Mechanical Engineering, Model Shop capabilities, PCB Design, Compliance Engineering and Testing, Technical Publications and Supply Chain Management in cost-effective partial or full turnkey solutions for today's flexible and demanding market.
Our team can be quickly integrated into any phase of the development lifecycle, adding new life to a delayed project, or meeting special resource and technology needs.
Our core business focus is on accelerating product development timelines through innovation, experience and cost-effective solutions.

Cornerstone Lab
CONTACT: Bruce Brentlinger
PHONE: 619.460.4760
FAX: Available upon request
E-MAIL: Please visit contact section of web site
www.c-lab.com
ADDRESS: San Diego, California
CATEGORIES: Engineering Services, Systems Integration, Programming
As it relates to electrical, electronic and computer engineering: Product Concept development, System engineering, Electronic design, Printed Circuit Card Layout, Firmware (microprocessor, microcontroller, FPGA, or other programmable devices), Software (windows programs to control a process or a windows database program to collect, process and analyze data), Cables, Harnesses, and Interconnects, Mechanical design (enclosures), Test, verification and integration, Reverse engineering, Re-design, Consulting. Practice is not limited to a particular specialty or industry.

Engineered Systems Incorporated
ADDRESS: 395 Sunnyside Blvd., LaSalle, Ontario, Canada N9J 3J5
(Beside Windsor and only 15min. away from Detroit)
CONTACT: Michael Levesque, President & CTO
PHONE: 519.978.3031
FAX: By inquiry only, call first
E-MAIL: mike@engsysinc.com
www.engsysinc.com
CATEGORIES:
Assembly Services / Contract Manufacturing / Project Management & Turnkey Services
Cable & Wire Harness Assembly
Engineering Services / Systems Integration / Programming
Plastic Injection / Compression / Mold Design / Product Design
Printed Circuit Design & Layout

Complete product design from concept to manufacture. Engineered Systems Incorporated is part of the networked companies forming the Engineered Systems Group of Companies which provide not only engineering services but also prototyping, graphics, marketing, packaging, testing and development, purchasing and logistics. With several tool shops, moulding facilities, electronic assembly, chemical applications systems, specialized printed circuit manufacture and complete fabrication systems under one umbrella; Engineered Systems Incorporated provides the same capabilities as the larger competition at prices truly competitive with both overseas and large scale manufacturing centers within North America.

Engineered Systems Incorporated utilizes only the finest tools to produce conceptual products for clients and then take them from an ideological state and produce real world products. We specialize in complete product development, prototyping and manufacturing. From integrated printed circuit assemblies to plastic enclosure, Engineered Systems Incorporated not only provides design and technical services but also provides OEM capability for electronic prototyping, assembly and test, plastic mold design, injection, and thermoforming, die design, metal forming and stamping, metal fabrication and assembly, fixture and gauge construction, cable harness design and assembly, purchasing and component distribution in addition to a worldwide link of resources in North America, Europe and China. Engineered Systems Incorporated is constantly recognized as a world leader in constructive planning, development, and effective project execution with the highest results; achieving the highest return on investment and continued delivery of excellence. While small, Engineered Systems Incorporated is a world class company that is just the right size to be responsive, agile, and results oriented. Visit our website and contact us today regarding your requirements. We are members of IEEE, OACETT, SMTA and the IPC Designers Council.

Click here to see an example of a 3D rendered assembly drawing done by Engineered Systems Incorporated

Flextronics International Ltd.
CONTACT: Sales
PHONE: 408.576.7000
FAX: 408.576.7454
E-MAIL:info@flextronics.com
ADDRESS: 2090 Fortune Drive
San Jose, California 95131
www.flextronics.com
CATEGORIES: Assembly, PCB Design, Engineering, Turnkey
Manufacturing services:
Full System Build, Electromechanical Assembly, Cable Assembly, Plastic Injection Molding, PCB Assembly, ICT/Functional/ESS and Systems Test, Distribution, Warranty Services .
Engineering services:
Product Design, RF Engineering, Mechanical Engineering, Test Development, PCB Layout and Design, MCM Design and Manufacture, ASIC and IPC Design, Advanced Technology Assembly, Prototyping, Design for Manufacture.

Gator-CAD, Inc.
CONTACT: Gregg M. Connary
PHONE: 561.704.2445
FAX: 561.733.8679
E-MAIL: gconnary@gatorcad.com
FTP ADDRESS: ftp.gatorcad.com
www.GatorCAD.com
ADDRESS: 8389 Elaine Drive,
Boynton Beach, Florida 33437
CATEGORIES: Printed Circuit Design & Layout, Engineering Services
Gator-CAD is an independent service bureau providing creative Printed Circuit Board (PCB) artwork designs and their respective documentation. We provide innovative, top-quality designs using the latest tools that help our customers improve productivity and decrease engineering cycle times. We pride ourselves in excellent customer service and our commitment to quality.

Innovative Design Engineering and Services
CONTACT: Drew Siebert
PHONE: 206.350.0823
FAX: 206.350.0823
E-MAIL: everythingpcb@ideasllc.us
www.ideasllc.us
ADDRESS: 16840 SW County Line Rd.,
Rose Hill, Kansas 67133
CATEGORIES: Engineering Services / Systems Integration / Programming
IDEAS, LLC - Innovative Design Engineering and Service provides System Design, Circuit Design, Firmware/Software/User Interface Programming, PCB Layout, Technical Writing, Testing, and Manufacturing Management services.

Labtam Pty. Ltd.
CONTACT: Sales
PHONE: 61.3.9580.5911
FAX: 61.3.9587.4986
E-MAIL:See web page
www.labtam.com.au
ADDRESS: 33 Malcolm Road (P.O. Box 826) Braeside
Vic 3195 Australia
CATEGORIES: Turnkey Services, PCB Design, PCB Manufacturing and Engineering services
Manufacturing Capability:
* Surface-mount and through-hole p.c. board assembly
* Prototype to high volume production
* Packaging and distribution
* Product test and burn-in
* Box-build and system integration
* Warranty and repair services
* Manufacturing Equipment Specification
* Standard Terms and Conditions
Quality Assurance:
* Consultation ISO 9002
R & D:
* Design, manufacturing and engineering services - Design for manufacture (DFM)

MPC Design Technologies, Inc.
CONTACT: Steve Castillo
PHONE: 505.797.1221
FAX: 505.797.1222
E-MAIL: mpcdt@mpcdt.com
ADDRESS: 8360 Corona Loop NE
Albuquerque, New Mexico 87113
www.mpcdt.com
CATEGORIES: Engineering, Assembly, Fabrication, PCB Design
MPC Design Technologies, Inc. MPC has established itself as a complete support facility in the electronics corridor from Design and Layout through Consignment of Full Turnkey Assembly. We place a great importance on quality, functionality and doing the job right the first time. Our commitment is to provide you with the best support possible by any Design and Contract Manufacturer anywhere in today's market. We have successfully Designed, Fabricated, and Assembled many field-buss boards from Back Planes, ISA, Mezzanine IP, PC-Mother Boards, PCI, VME, VXI, to Custom stand alone Printed Circuit Boards (PCBs). We adhere to your requirements and specifications. Our in house Quality Standard is IPC-D-275 for Design and Layout, IPC-A-600, 6012 or MIL-P-55110 for board Fabrication, and IPC-A-610 for Assembly.

Parlin Engineering
CONTACT: William C. Parlin
PHONE: 231.267.5390
FAX: 734.468.0141
E-MAIL: wcp@parlin.com
www.parlin.com/engineering
ADDRESS: 5864 Mabel Rd.,
Williamsburg, Michigan 49690
Categories: Printed Circuit Manufacturers, Engineering Services, Systems Integration, Programming
Offering you the skills, resources and experience gained during my 20+ years of fast-paced, high-quality printed circuit board manufacturing.

Services:

Printed Circuit Boards
* Reverse-engineering existing boards * Artwork conversion from paper or film to Gerber * Circuit design from schematic drawings *
* Inventing and product development, from concept through production * PCB sourcing, consulting, process and vendor qualification *

Process Engineering, Development, and Control
* Nearly any wet or dry manufacturing process challenge * Process control equipment and systems, from concept through installation *
* Computer control, sensing, motion, reporting, etc.. * Waste minimization programs to reduce, re-use, and recycle *
* Hazardous and corrosive materials and environments *

Machining
* Surface grinding * Punch press die sharpening and maintenance * Diverse machine tool resources and capabilities *
* Contract or On-Demand basis *

Corporate Websites
* Tailored services including creation, publishing, webmastering, and training * Utilization of lowest cost webhost servers (currently $8.25 per month) * Full graphic arts and desktop publishing capability * Custom forms, cgi scripting, reporting, etc.. * Continuous HTML authoring since 1995 *

Protomatix
CONTACT: Lee Zuhars
www.Protomatix.com
CATEGORIES:
* Product Development / Rapid Prototype
* Assembly Services / Contract Manufacturing / Project Management & Turnkey Services
* Engineering Services / Systems Integration / Programming
* Printed Circuit Design & Layout Services
* PCB Test Fixtures & Electronic / Mechanical Test / Assembly Fixtures
� ATE, ICT, semiautomatic & manual test fixtures, cable / wiring harness test / assembly fixtures, dedicated / functional test fixtures
� Electronic (PCB) / mechanical test / assembly fixtures programming.
� PADS Schematic capture, PCB design / layout, B.O.M. maintenance, and manufacturing / fabrication documentation.
� Manufacture engineering. Production improvement consultation. DFM, Design for manufacture. DFT, Design for test.
� 3D solid modeling, prototype animation.
� Assembler, C++, and Visual Basic programming.
� Prototype of electronic circuits, Electronic enclosure design, and electro-mechanical devices including pneumatic, hydraulic, optical and drive type actuators.

Shared Resources
CONTACT: Sales
PHONE: 510.400.4280
FAX: 408.692.9898
www.Shared-Resources.com
ADDRESS: 2336F Walsh Ave.
Santa Clara, California 95051
CATEGORIES: Printed Circuit Design & Layout Services * Engineering Services / Systems Integration / Programming
The principals of Shared Resources have been in the Engineering Services business for 3 decades now, and we have served the electronics community in the Silicon Valley since 1984.
Helping our customers develop their board level proto-type as fast and painless as possible is our mission.
Our services include:
* PCB Design - experience, on-site availability, continuous operation
* PCB Fabrication - fast delivery, competitive advantage, consistent quality
* PCB Assembly - any quantity, latest technology, local support
* Design Engineering - full service, flexibility, collaboration
* Signal Integrity - high speed, confidence, accuracy
* Test Engineering - high tech equipment, consistency, cost effective
* EMC Compliance - schematic review, in situ testing, personalized training

SPICE Modeling Associates
CONTACT NAME: Brian Wheeler
PHONE NUMBER: 310-770-4589
E-MAIL ADDRESS: models@spicemodeling.com
WEB SITE LINK
STREET ADDRESS: 1741 S. Carmelina Ave.,
Los Angeles, California 90025
CATEGORIES: Engineering Services
Service for SPICE and PSpice modeling and simulation. Models can be created for most small signal bipolar transistors, power bipolar transistors, MOSFETs, opamps, optocouplers and photodiodes, SCRs and Triacs, power devices including PWM switch-mode regulators, and other special purpose devices.

Sunman Engineering, Inc.
CONTACT: Allen Nejah
PHONE: 408.441.1500
FAX: 408.441.7900
E-MAIL: allen@sunman-engineering.com
ADDRESS: 2635 North First Street
San Jose, California 95134
www.sunmantechnology.com
CATEGORIES: PCB Design, Engineering
The SunMan Engineering staff can perform the engineering tasks specifically needed in Electronic and Mechanical applications. We provide High Quality and Cost-efficient engineering services from design to manufacturing.
Click here for video presentation

Video Rules
CONTACT: Eva Marti
PHONE: 408.813.5917
FAX: N/A
E-MAIL: info@videorules.com
www.videorules.com - Board and System Design Services
ADDRESS: 1041 Harlan Dr.,
San Jose, California 95129
CATEGORIES: Engineering Services
Video Rules provides boards and systems design services. We do complete projects from concept to production or we can work on a smaller portion of a project. Video and Audio is our specialty, although we also have done network, control and RF systems. We do analog, digital and mixed signal boards. We have done multimedia, broadcast boards and consumer system. We have also done many tests, demo and bring up boards for audio/video chips as well as reference boards for marketing purposes.

[Previous] [Next] [Up] [Home]