EverythingPCB : Data Conversion Services

Data Conversion Services

D03* Inc.
CONTACT: Steve
PHONE: 408.969.9680
FAX: 408.988.8960
E-MAIL: smt@msn.com
ADDRESS: 3255 Woodward,
Santa Clara, California 95054
www.D03.com
CATEGORIES: Data conversion, Chemical Etching & Machining, CAD/CAM Services, Gerber Editing & Photoplotting

Photoplotting:
At D03* Inc. we can plot images as large as 22x28in. (24x30in. film max) 1/4mil (4000 DPI) resolution standard, 1/8mil (8000 DPI) resolution optional. We can also panelize / tool / step & repeat and edit your Gerber files. Local orders in four hours or less.
Free local pickup and delivery.
Overnight shipping anywhere.

Chemical Etching & Machining:
Solder- Paste stencil stepdowns * Microwave antennas * Flex circuit stiffeners * EMI Shielding * Springs * Bus bars * Heat sinks * Model components & much more
Standard Materials Include: Aluminum * Brass * Copper & Stainless steel

Data Conversion:
D03* Inc. can convert the following CAD and Graphic Arts formats
IN:
ASCII Text Files (From NotePad, MS Word, etc. - Text may be assigned either Windows True Type Fonts, or AutoCAD SHX fonts)
Gerber (274-D & 274-X)
Drill / NCD
Mill / Rout
DXF / DWG
GDSII
HPGL I & II
OASIS
POSTSCRIPT / PDF / EPS
GIF
TIFF
JPEG
BMP
PNG
OUT:
IPC-D-350
Gerber (274-D & 274-X)
Drill / NCD
Mill / Rout
DXF / DWG
GDSII
IEGS
HPGL I & II
OASIS
POSTSCRIPT / PDF / EPS
GIF
TIFF
JPEG
BMP
PNG
RGB Channels
HVS Channels
CMYK Channels
YIQ Channels
8 - Bit Grayscale
16 - Nit Grayscale
24 - Bit RGB Truecolor
48 - Bit RGB
We can also take any number of Gerber files and aperture lists and make each of them compatible with each other assigning them one master aperture list!
We can also create Fab drawings!

Electronic Product Development, Inc. / Conversion Factors Software
CONTACT: Dan Judd
PHONE: 918.825.9300
FAX: 918.825.9395
E-MAIL: danjudd@epdcorp.com
www.edaxchange.com
ADDRESS: 4 South Vann St.
Pryor Creek, Oklahoma 74361
CATEGORIES: PCB Layout and Design Software, Data Conversion Services, CAD/CAM Services, Printed Circuit Design and Layout, Data Conversion Software
CFI produces Netlist, Schematic and PCB conversion software for Cadence, Cadstar, Mentor, Orcad, PADS, PCAD, Tango, Veribest, Viewlogic and Protel.
CFI also performs in-house translations of Schematics and PC Boards, for Accel EDA, Cadence, Cadstar, Mentor, Orcad, PADS, PCAD, Tango, Veribest, Viewlogic and Protel.
CFI also performs conversion of legacy gerber files to modern PCB designs.

Emerald Coast Circuits, Inc.
(Formerly Merriwether Circuit Design, Inc.)
CONTACT: Charles Merriwether
PHONE: 850.243.8144
FAX: 850.243.2050
E-MAIL mcdi@merriwether.com
www.merriwether.com
ADDRESS: P.O. Box 1526
Fort Walton Beach Florida, 32549-1526
CATEGORIES: Printed Circuit Design, Artwork Scanning, Photoplotting, Data Conversion, Front-End Engineering
Emerald Coast Circuits, Inc. is a service bureau dedicated to providing quality service to the printed circuit board process. Since our formation in 1976, ECCI has established one very important goal..."always consider the
customer's needs." Speed and accuracy play a most important role in our daily activities.
Emerald Coast Circuits, Inc. is prepared to respond to today's customer by maintaining dependable equipment and dedicated employees.
Our capabilities are presented for your review.
Design Service:
Fast and accurate layout of circuitry, from analog circuits to high density fine line circuits to surface mount circuits, is performed on our Hewlett Packard and PCAD workstations. And we now also use Accel EDA (P-CAD PCB) design software. Schematic capture is also available.
Scanning Service:
A database can now be captured from your artwork, paperplots, or bareboard. Our Icon Scan system can provide you with an alternative to printed circuit redesign at a much lower cost.
Photoplotting Service:
Same day photoplots are a reality with our Gerber Model 9720 Laser Photoplotter. Our fast service and low prices make ECCI very competitive in responding to the customer's plotting needs.
Panelization Service:
With our panelization software, ECCI can now provide panelized film within 24 hours. Drill and route files are provided to complete the panelization package.
Database Conversion:
ECCI can support you with many types of file conversions. A database, intelligent with symbols and connectivity, can be provided in many design formats.

GerberData.com
CONTACT: Paul J. Fedorys III, President
PHONE: 631.440.4423
FAX: N/A
E-MAIL: paul@gerberdata.com
www.GerberData.com
ADDRESS: 39 Bowne Avenue,
Blue Point, New York 11715
CATEGORIES: Data Conversion Services
Since 1997, our founder has been working with the various forms of gerber data in many different scenarios. With over 20 years of combined experience in the electronics industry, the engineers at GerberData.com can assist your needs whether it is simple advice or a complex problem.
Our services include: Reverse Engineering, Gerber to CAD / ICT / SMT and Gerber DFM.
Gerber formats we work with:
RS-274-D/X • Barco DPF • Fire 9000
CAD Databases:
Accel EDA • Allegro (ODB++) • Board Station • GenCAD • P-CAD 2004 • PowerPCB • TangoPRO • Visula CADIF
OTHER FORMATS:
ECAM DSN • IPC-D-350 • IPC-D-356( a ) • ODB++

PCB Data Services
CONTACT: Van Gregg
PHONE: 602.400.5526
E-MAIL: van@pcbdataservices.com
www.pcbdataservices.com
ADDRESS: 15850 N Thompson Peak Pkwy # 1027,
Scottsdale, Arizona 85260
CATEGORIES: Artwork Scanning Services / Data Conversion Services
Fast Service, competetive pricing, high quality clean centerline Gerber data.

[Previous] [Next] [Up] [Home]